POWV3.5 POWER SYSTEMS BATTERY BACKUP w/ push-button start
The POWV3.5 is an onboard battery backup system to provide an emergency jump-start (boost) in the event the vehicle’s battery is too weak to start the vehicle. It is wired in parallel to the vehicle’s starter battery and self-regulates its charge while the engine is running so that it is always ready for use. When needed, the POWV3.5 can be activated by pressing the GO/STATUS button or by using the mobile app. Once activated, the POWV3.5 provides a short pre-charge to the vehicle battery for approximately 5 seconds, following which the vehicle may be started. The POWV3.5 will detect when the engine is running and will automatically deactivate itself.
WATCH THE PRODUCT AT WORK: POWER SYSTEMS BATTERY BACKUP
WHY POWER SYSTEMS?
- Provides an emergency jump-start when your vehicle's battery is dead
- No need to rely on expensive Roadside Assistance, jumper cables, or portable jump packs that lose their charge
- Installed battery-backup system for piece of mind, every time
- Comfort & Convenience - Start your vehicle from the driver's seat with your smartphone. Worry & hassle-free operation
- Works with all gas light diesel vehicles
- Great for teen drivers, elderly parents, emergency response vehicles, commercial fleets, and much more
- Versatile installation allows install under seat or in trunk
- On-Demand power when you need it
- Wires directly to the vehicle battery so you never need to go outside in the cold, heat, or rain to hook up jumper cables
- Self-monitoring to prevent overcharging
- Easily controlled through available Android and iOS apps
- Dimensions: 8.5" x 8.5" x 1.75"
WHAT'S INCLUDED:
Instruction and owners manual included. The POWV3.5 is supplied with two vinyl insulated barrel style butt connectors to extend the POWV3.5’s 6 AWG power leads to the vehicles battery. Please refer to the Cable Gauge/Distance chart to determine the proper gauge cable needed for the power cable run. The POWV3.5 is also supplied with two 60mm Heat Shrink tubes (red and black) to protect the POWV3.5’s 6 AWG power/ground connections.
Product ships out within 2 days.
Please note included installation safety instructions. 4 AWG of True Copper cable is required (not included).
